 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Dishwasher Model 665.1397 - Won't Start - How do we reset?
We can't start the dishwasher. If we hit Start we get the usual 'Press Start to Repeat Last Cycle' message, but when we hit Start again a couple of lights flash and we get an annoying set of beeps. Is there a button combination to reset the controls or run diagnostics? I've seen other button combinations on the forum, but they don't match the buttons that appear on our model.
|
||||
|
||||
|
You have an open safety somewhere, like a stuck high water cut-out. You will have to find the safety and fix the problem first. Here are some things that may help: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
https://dl.dropboxusercontent.com/u/...t%20codes.docx https://dl.dropboxusercontent.com/u/...ishwashers.zip https://dl.dropboxusercontent.com/u/...e%20Manual.pdf |
||||
|
||||
|
I'm afraid those links are of no help because they do not relate to my model. I do not have a "Heated Dry" button. My buttons are Smart Wash, Pots&Pans, Normal Wash, ECO, China Gentle, 1HourWash, Turbo Zone, High Temp, SaniRinse, Smart Dry, and 4HrDelay.
Do you know a button combination for these that will allow diagnositics? Carl |
||||
|
||||
|
You will have to check it out with a meter and a wiring diagram, if you can find one. You should have one in an envelope inside the dishwasher, usually behind the kickplate at bottom. If you have a component failure resetting it will have no result. However, if you find that manual in the dishwasher you may find instructions.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Kenmore Ultra Wash Dishwasher. It will not start. The light above normal wash is flashing continuously. Any advice will be helpful. Our warranty ran out 9 days ago:rolleyes: Thank-you in advance:o
I have a Kenmore Diswasher quiet quard 4 that is about four years old. The last few weeks I have heard what sounded like the dishwasher making more noise than usual. I went to start the dishwasher today and hit the smart washer / start resume and the washing and cleansing lights come on but nothing...
Smart cycle buton light blinks. No other wash option buttons work including start. The cancel button does turn off the blinking.
Does anyone know the reset code for model 665.13779? The red lights on the "normal wash" and "cancel" buttons flash and the washer is completely unresponsive. I've found reset codes for just about every model but this one! As an alternative I tried this, and it seemed to work momentarily. So...
We have a Kenmore Elite Model 665.15952 (or 15953/15954/15959) Dishwasher. After six months of not using the dishwasher, whenever one presses the "Start" (or any other) button, only the "Quick Rinse" light blinks on and off. There is no sound, and no dish washing. I've turned off the house...
View more questions Search
|
