Ask Experts Questions for FREE Help !
Ask
    johnson48's Avatar
    johnson48 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2014, 04:40 PM
    Why do we have to reset our coleman evcon?
    Why do we have to reset our coleman evcon when it goes thru its cycle, for some reason blower does not come on?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Jan 14, 2014, 07:34 PM
    The reason you have to reset the furnace is the fan is not coming on & the furnace is overheating. Why the fan isn't coming on is another question. Do you have a voltmeter & know how to use it?
    johnson48's Avatar
    johnson48 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Jan 14, 2014, 08:31 PM
    Yes I have a Voltmeter. I now some of it. What do I need to do.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #4

    Jan 15, 2014, 08:46 PM
    You have to find out from where the fan motor gets it's power & check for 120 volts AC between that point & neutal or ground. This must be done when the furnace is hot enough to bring on the fan. If you get the 120 volts but the fan doesn't turn on, you probably have a bad fan motor.
    johnson48's Avatar
    johnson48 Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Jan 27, 2014, 07:25 PM
    Thank you for the help. It was the fan motor that was bad.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #6

    Jan 27, 2014, 09:39 PM
    Glad I could help. If there are any other problems, we're here & will do our best to help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman furnace heat setting for coleman evcon furnaca modeld g a 207 5800 [ 0 Answers ]

Where is the heat anticipator setting for a coleman evcon furnace model dga2075800

Coleman evcon? [ 0 Answers ]

When I swtich my stat to them heat it won't switch over no red light

Coleman evcon [ 1 Answers ]

I installed a Honeywell digital thermostat for my parents, which I have done myseld with no problems before. Foolishly, I didn't notice that the coleman evcon system has a couple more wires that the honeywell didn't have a place for, so I undid the wiring, and hooked the old therm back up. Note: I...

Coleman Evcon [ 2 Answers ]

My mother has a Coleman Evcon dgat090800 the problem is that the burner will light up on it and burn until the blower kicks on then the burner will quit I can test parts on it but am not positive what the readings should be can someone help.

Coleman evcon [ 1 Answers ]

Furnace won't ignite the starter blower runs but nothing else happens

View more questions Search