Replace cable to engage Craftsman 42" mower deck

philiptrapani9383 Posts: 2, Reputation: 1

New Member

Mar 31, 2007, 02:10 PM

Replace cable to engage Craftsman 42" mower deck

How do I replace the mower engage cable on a 42" craftsman lawn mover deck?

philiptrapani9383 Posts: 2, Reputation: 1

New Member

Mar 31, 2007, 02:11 PM

I am not sure how to do this?

Add your answer here.

Check out some similar questions!

Weedeater Riding Mower, Blade won't engage [ 2 Answers ]

We have a Weedeater riding lawnmower model 733-848 or HD12538j. The blade will not engage and I found a spring that fell out. I can't tell by the manual where it goes.

Craftsman Riding Mower 23 Kohler hp 24 inch deck [ 11 Answers ]

I recently went out to mow my lawn with this otherwise reliable machine. I pulled the PTO clutch switch to engage the blades. They started to rotate and I was on my way, for about 30 seconds and then the blades stopped rotating. The motor runs perfectly yet the drive unit for the blade belt does...

15.5 briggs & Stratton "Craftsman Riding mower [ 7 Answers ]

I have a Craftsman 42" Riding mower that's approx 5-7 years old. It runs great when it runs, but when I try to start it up is when I run into trouble. Ive replaced the battery... brushes in the starter... fuel filter... cleaned all the battery connections including the ground on the frame. It...

MTD blades will not engage on riding mower [ 6 Answers ]

I have a Lowe's MTD mower. The blades will not engage.

Looking for new lawn mower deck [ 1 Answers ]

I have a 1993 Sears Craftman riding lawn mower 43" "Steering Machine". I need a new mower deck. Sears does not support after the mower is 10 years old. AYP made the original deck but they don't offer. Seems part of the issue is 43". The tractor is in great shape just need a new deck. Any...