Ask Experts Questions for FREE Help !
Ask
    Bama chef's Avatar
    Bama chef Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2013, 02:26 PM
    Carrier weather maker
    My weather maker 8000 is driving my crazy. Keep getting code33 I have changed filters cleaned flame sensor took flame roll out switch off connectors and taped together. It will start it's sequence and flames come on and seems like it's going to work but after a little bit it pops again and code 33 comes back on. The inducer comes on like it suppose too. What do I need do I need to buy a new roll out switch my blower motor works fine
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 8, 2013, 04:58 PM
    You need to monitor voltage across the pressure switch terminals. As soon as the thermostat calls for heat, you should get 24 volts AC across the terminals. When the exhaust blower starts, that 24 volts should go away. If it comes back at any time with the exhaust blower running, you probably have a vent or drainage problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need advice on a Carrier Weather Maker [ 0 Answers ]

Hello, I was hoping somebody could give me some advice on my furnace so that I can repair it myself or at least have an ideal of what's wrong when the tech comes over. Here is the technical information of the unit. It is a Carrier Weather Maker, using propane gas, and it is 88,000 BTU. I believe...

Carrier weather maker 8000 [ 6 Answers ]

Hi everyone. I am new to this forum and would like your help. I have a Carrier Weather Maker 8000 and I am having problems with it. Its keeps shutting off before it reaches the desired temperature . I made a couple of clips that I hoped would explain the problem better. The Start:...

Carrier Weather Maker 8000 [ 2 Answers ]

We just moved into a home and have a Carrier Weathermaker 8000 gas furnace. Most of the time the furnace works well but at times it comes on many times in a row and in short intervals?? It ignites for only 1 minute at a time but at least 20 times in a row, this doesn't seem a regular operation. ...

Carrier weather maker 8000 [ 5 Answers ]

Model # 58TUA06008 has had the main board replaced but it keeps shuting off and then will restart after four hours or if I shut the power off and turn it back on. Is this an issue with the heat sensors or something else. I known the main board has been recalled is there any other issues. Thanks G

Carrier weather maker 8000 [ 1 Answers ]

What's the cost of a Carrier weather maker 8000 ignitor and how can I purchase it? Thank You

View more questions Search