Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to ground propane copper pipe?
[ 2 Answers ]
I'm installing a propane garage heater. The propane tank will be outside with a copper pipe feed to the inside heater. I read I need to ground the copper pipe. How Do I do this? I read I need to ground it to the electrical panel. I've also read I need to ground it to a grounding stake in the ground...
Can I ground my generator to a copper rod driven into the ground with coax cable?
[ 2 Answers ]
I am going to test my 6000 watt generator. It is recommended that I ground it to a copper rod driven into the ground. I alread have a copper rod that is used to ground my telephone and cable lines. Can I use a length of coax cable to run from my generator ground to the copper rod?
Attaching copper faucet to copper pipe attached to plastic pipe?
[ 1 Answers ]
I have plastic piping in the house which leads outside and then copper piping is outside with a facet attached.. I need to change the facet with torch and solder... if I heat the old one to remove with this heat travel down the copper pipe through the wall and affect the plastic pipe.. I am worried...
Correct method to RUN copper ground wire to ground a 200 amp electrical circuit box?
[ 0 Answers ]
Is a 3-wire copper ground or a solid copper wire required to ground a 200 amp electrical box? Is this wireing correct: A 3-wire copper ground wire in a conduit run from the electrical panel to the copper rod in the ground then to the cold water; AND THEN IN THE GARAGE the naked 3-wire...
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
[ 4 Answers ]
I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran... View more questions Search
|