 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Have 1999 dodge durango 5.9 has codes po340 and p1391 run for a while cuts off
Have a 1999 dodge durando 5.9 has codes po340 and p1391 have replaced crank sensor ing. Coil and computor. Still does the same thing runs for a while then cuts off and will not start back up for a long time need help please
|
||||
Check out some similar questions!
Hi. I just saw these codes pop up yesterday after I replaced the harmonic balancer on my '99 Durango. It barely runs, feeks like it wants to die. I know the codesare for the crank and cam sensors. Now, I jamed a large screw driver into a square hole next to the flexplate to the motor from turning...
Where are the p0320 and p1391 sensors located in the dodge intrepid?
Starts easy smooth idle miss at 1500 up it has new plugs. Wires fule pump injectors the miss is bad like out of time it pops back some 120000 mils
1999 dodge durando 318 magnum 4x4 have changed all sensors that computer has given codes for. Driving @ about 50, 55 mph it starts to sputter & almost shut off. The service engine light is not on. You can let it idle & it starts to overload with gas, can you tell what is causing it to do that? And...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
