 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What's the problem with my Rheem furnace?
When I turn the thermostat up, fan comes on but not burner. After a few seconds the burner turns on but goes off after about 3 to 5 seconds. The green light on the right is on all of the time. Second green light blinks and the yellow light starts to flash when the igniter starts, but the burner will only come on for a few seconds then will cycle 2 or 3 times, but won't stay on. What's the problem?
|
||||
Check out some similar questions!
My intertherm furnace keeps turning off after about 6 seconds. It'll be off for about a minute then will burn again for six seconds and stop. This keeps repeating.
I have a programmable thermostat. The A/C works runs fine when it's cooling a room from a different tempeture. The problem comes when it's the A/C turns on to maintain the programmed temp. It then runs for like 8 seconds, then I hear the outdoor condenser unit shut off, then the blowers inside...
The fan is running, I changed the position of the ignitor and got the flame to stay lit and the furnace is running; but it will run until therm temp setting is met then will turn off like normal. But when it fires up again, the flame will not stay lit. I cleaned the ignitor and temporarily removed...
I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
