Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Details on how to restart furnace after running out of oil NEEDED
[ 0 Answers ]
We have a Weil-McLain Gold Oil Model # P-WTGO-4, Series 3 hot water/heating system. We ran out of oil & now need to restart. We're pretty clear on how to bleed the air out of the oil lines, but are a little confused concerning bleeding the air out of the water line. The manual we looked at...
Oil furnace doesn't stop running
[ 1 Answers ]
Today our Lennox OF7-140M oil furnace continued to run long after the temperature was well above thermostat setting. I toyed with the dial thermostat to be sure it was behaving normal. I eventually turned off the furnace with the breaker. After the furnace had set off for several hours I...
FA oil furnace blowing cold air when not running
[ 6 Answers ]
WE have a forced air oil fired furnace (and water heater if that matters) and while it works well most of the time, sometimes on a windy day we'll get cool air blowing through the registers when the furnace isn't even running. What could be the cause of that? The furnace is vented out through a...
Oil ran out; we refilled, but now we can't get furnace running again
[ 1 Answers ]
We woke up the other morning to our house being 53 degrees. We knew we were getting low on oil, but hadn't realized *how* low. We got some oil delivered that day, but we can't seem to get the thing running again. It's an old --very old-- Thermopride furnace. My dh has pressed every button he can... View more questions Search
|