 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore elite washing machine will not spin
Model # 110.28803890 Serial # 1048800 will fill up and wash but won't spin and drain. Found what looks like a grey switch that is broken when you shut the washing machine door, could that be the problem? Any help would be awesome! Thank You
|
||||
|
||||
|
Look at these: https://dl.dropboxusercontent.com/u/...ng_Machine.pdf
https://dl.dropboxusercontent.com/u/...sher_Elite.pdf https://dl.dropboxusercontent.com/u/...c%20washer.pdf https://dl.dropboxusercontent.com/u/...e%20Manual.pdf You will need to use a meter to find the problem, most likely. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
This is a Kenmore Elite Catalyst heavy duty, top load, king size capacity, ultra quiet pak, 3 speed motor with 6 speed combinations washing machine. The agitate works OK and it spins somewhat, but the clothes are still wet at the end of cycle and I have to spin cycle it twice. The pump seems to be...
I'm not sure if I have the correct model number. Nothing on back of washer. Under lid: SM 9710768-C. This is a Kenmore Elite Catalyst heavy duty, top load, king size capacity, ultra quiet pak, 3 speed motor with 6 speed combinations washing machine. I've tried both spin speeds, but neither work....
My Sears Elite Washing Machine doesn't always spin and it wants to blow the breaker every once in a while. I've taken the pump off to see if it was plug and it was'nt, I taken the motor off to see if the coupler was bad and it was'nt. I've even run the motor with nothing hooked up and it runs fine....
I have a four year old kenmore elite washing machine that will not agitate or spin and only makes a loud humming/grinding noise. It sounds a s if the mottor is running, yet is diengaged from whatever turns the agitator. Any help is much appreciated! Thank you, Dan
View more questions Search
|
