 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Probably stopped up filter screens. Remove hoses and clean the screens after pulling them out first. Make sure to replace them. Look at these: https://dl.dropboxusercontent.com/u/...c%20washer.pdf
https://dl.dropboxusercontent.com/u/...sher_Elite.pdf https://dl.dropboxusercontent.com/u/...e%20Manual.pdf You could also have a bad solenoid coil, water level control, or water inlet valve. You will need to use a meter to find out. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My dryer quit shortly after starting a load and the clothes were still wet. When I press the start button, it beeps and the "check lint screen" light flashes. I've removed the lint trap assembly, cleaned everything out. What do I need to do next? Thanks.
When I open the door the light comes on, but nothing on the control panel is lighting up/working?
I took the lint trap apart to clean it there were two wires attached from dryer to lint trap they fell inside the dryer I am unable to reach them easily are they important? What r they used for? Everything seems to be working all right
Won't switch to next cycles, what part would I need to buy? Won't stop filling at small load, will fill up all the way? What part do I need to fix this?
View more questions Search
|
