 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Echelon 9.c furnace not starting
Hi everyone, have an echelon 9.c unit that tries to turn the furnace on and then gives me two red blinking lights as an error. Per the manual it's "pressure switch closed with inducer pressure below pressure switch setpoint. Check pressure switch."
Any guidance as to how to fix this? |
||||
Check out some similar questions!
After going through 5 days of no electricity from Hurricane Sandy and having a 1yr old come down woth a cold at the same time, I've decided to start researching into getting a generator that will power some appliances and my furnace. I have a Coleman echelon 9.c that was installed about a month...
After going through 5 days of no electricity from Hurricane Sandy and having a 1yr old come down woth a cold at the same time, I've decided to start researching into getting a generator that will power some appliances and my furnace. I have a Coleman echelon 9.c that was installed about a month...
I've replaced my furnace with a the echelon 8v during A/C season. The existing chronotherm T8600C1014 is about 20 yrs old. All was well during cooling season. In heating the blower off delay is not responding as programmed on the board. It is set for 90 sec. When stat drops the call for heat...
x+y+z=-4 x-y+5z=-14 3x+y+z=-10
I am seeing people referring to themselves as echelon. I looked it up but I keep getting something about a global spy system and I don't believe that is what they mean by that term. Anyone have any ideas?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
