Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can I replace 1/4 hp 440 volt condenser motor with 1/3 hp 230 volt
[ 1 Answers ]
My old motor is 1/4 hp 440 volt ph 1 and rpm is 850 now I have to replace it with 1/3 hp 230 volt ph 1 and rpm is 1075
How to wire 230 volt gfi to pool pump
[ 0 Answers ]
I have a new pool pump a Hayward 3/4 hp super pump The old motor was removed and pool closed for two years. I have a federal Pioneer Stab-loc Gfci breaker that was wired for 230 volts at 15 amps all the wireing is still at the panel but doesn't enter panel. This wire is 14 gauge 3wire (white black...
Wiring 230 Volt Pool Pumps
[ 1 Answers ]
Wiring 230 Volt Pentair Pool Pump. It has Line 1, 2, 3 ground is separate to chassis. Which one is common?
Wiring two 230 Volt pool pumps inseries
[ 5 Answers ]
Hello, I am rewiring switched for two pool pumps. The old set disintegrated so I cannot tell how they were wired. The two pumps are recirc and booster and are both 230v. I would like to wire them so that the booster can only turn on when the first pump is on. How can I manage that wiring with no...
230 volt DC lathe motor
[ 16 Answers ]
I recently purchased a new german made lathe with a 1 and 1/2 h.p. single phase DC motor rated at 1400 watts at 2800 rpm, the plate on the motor says 60 hertz. 6 amp nominal consumption 230 volts. I also purchased a 110volt to 220 volt step-up transformer rated at 2300 watts. The lathe has a... View more questions Search
|