Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Updating service panel to 200 amp with feeder to 100 amp panel in old house
[ 8 Answers ]
I currently in the process of converting 1000 sq ft of attached garage into living space while doing this we are updating electrical service to 200 amp new service, there is 100 amp service in the old part of the house which will remain but need to be sub paneled from the new 200 amp service. I...
Main 200 amp. Installing a 200 amp sub-panel. Wire size jumper to connect(2 /100 amp)
[ 1 Answers ]
Installing a 200 amp.sub-pane (type D- Hom), the main panel is 200 amp.also, I'm using 2 /100 amp. Breakers. My question is : what wire size do I need for the jumper to connect the two breakers. I'm using #2 X3 and #4 ground wire to connect the sub-panel, do I need the same#2 for the jumper? Or...
100 amp main, 100 amp service wire, 200 amp sub panel?
[ 2 Answers ]
I am moving my sub panel and upgrading to a 200 amp service, but in phases. The first phase is to move the panel due to some remodeling. I want to put a 200 amp panel in the laundry room with a 200 amp breaker. I have 100 amp feeder wire going to it (AL 2/2/2). Outside I have the meter can and...
Change 100 amp to 200 amp panel
[ 2 Answers ]
I have an older cottage with a 100 amp fuse panel.I would like to change over to a 200 amp breaker panel.Can I install the 200 amp panel along side the old one , change over my wiring to it then run the main incoming power to the main breaker of the 200 panel ?I also want to run power to a new... View more questions Search
|