 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I ordered a new pull chain switch from Hunter and I want to install it myself. It's configured a bit differently than the original. The switch has 4 slots on the side like the original (Well Tec) and also 4 small round holes on the top. Can someone tell me where and how to connect the fan...
I have a Heritage Model H42UL (05 2001) ceiling fan that had the fan switch removed before I acquired the fan. Wire colors for the switch are Black, Orange, & from the capacitor, Yellow & Purple. Which wire goes to which slot on a new switch?
Our ceiling fan switch clicks but the fan does not go on. When I opened the housing, I saw that there was 6 wires, 2 of which were white. One of the white wire was not connected, it could have caused the fan to stop working (?). I do not know where this white wire should be connected to as all...
My chain broke off in the switch, it has an L 1 2 3 on the switch with 3 wires, #1 is a blue wire, #2 is a black wire and #3 is a red wire. I don't know what the numbers mean, unless it's a 3-way switch for 3-way bulbs, I don't care about the 3-way stuff, I just want off & on. Our local Wal Mart...
I just replaced the broken pull chain switch on a ceiling fan. There were two black wires coming from above the light socket. Either way I attached them to the two black wires coming from the pull switch worked. Does it matter which goes to which if they work either way?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
