Ask Experts Questions for FREE Help !
Ask
    odonnelld's Avatar
    odonnelld Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2005, 12:51 PM
    Hampton Bay Track Lighting
    I have Hampton Bay track lighting in a bathroom and now two of the heads will not work, I have replaced with new heads and still will not work, can move the last two heads that do work to any place on the track and they work. Have replaced bulbs with one that have confirmed working.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Feb 6, 2005, 01:53 PM
    Pull the ones off that aren't working. Take a look at their contacts, and the contacts in the track. You may want to shut the power of for that. Do the contacts look like they should touch the contacts in the track. Is everything the same model? Use an ohm meter or test light to see if the contacts in the lights show continuity. If they don't even with known good bulbs, take them back.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Track Lighting head [ 3 Answers ]

How do I go about purchasing a new nickel-finished Hampton Bay Track lighting head. I think the model number is RKI 610543. Not available at Home Depot in other than black & white finishes.

Track lighting question [ 2 Answers ]

Hopefully an easy one for you guys: I am replacing track lighting in my house (built in '97). The new track has black, white and green wires. The exisiting junction box in the ceiling has a yellow and a white wire with no ground. Should I wire yellow-->black and white-->white? Can I ground...

Hampton Bay Track Lighting [ 1 Answers ]

I am installing Hampton Bay track lighting in my kitchen. I am wanting to use the H design with two parallel tracks. Using two 4' bars on each side connected with a 2' bar in the middle. We have one side hooked up but when we tried to put the T connector in the other side it would not fit. Do...

Hampton bay track lighting [ 1 Answers ]

We just installed a hampton by track and bought Halo by Laser lights. Nothing is working. Are they not combatible? They are both "3-wire" systems, (I believe called "H" systems) with 2 wires on one side and one on the other.

Hampton Bay Track Lighting Problem [ 1 Answers ]

I just install 3 8' sections of track lighting. The first section works fine. The 2nd and 3rd sections do not. They are connected by the 90' connectors and look to be fine but the lights do no work. Tried the lights that Do work on the first section also so I know it isn't the lights. Does it...

View more questions Search