 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troy bilt mower problems
I have a troybilt pony riding mower. After dropping it into reverse with the blades still engaged (oops) the mower stalled out like it should, however there was a loud gunshot like sound and now it will do exactly nothing. When I turn the key there is no click, no nothing. I checked the in line fuse which is still good. I have tried disconnecting/reconnecting the battery and nothing. The only thing I can think of is the transmission slipped and is registering it is still in gear which is why it won't start. Is this possible? And if not what could it be?
|
||||
|
||||
|
Hi,
Is the deck still engaged? That will do that. The loud bang you heard was afterfire from hot unburned air/gas mix entering a hot muffler. This will potentially shear a flywheel key which would keep it from starting, but not from turning over. Having the deck engaged, not putting on the brake or being in the seat could do those. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How do I install a belt for self propelled model565? I can't get belt around pully assembly on the transmission side!
I have a troy-bilt riding mower and it sometimes gets stuck in gear and wants to keep moving whether it be forward or backward. I can put on the break and it still won't stop. I just had new drive belts put on. Could this have anything to do with it. If not what could be causing this to happen?
Troy bilt colt 20 hp 42 in cut. The right side does not cut well - only about half of the grass Left side cuts fine About a year old Blades are sharp Cut well when I bought it.
I have a troy lawn tractor 18 horse 42 inch cut. I have replaced the belt on the deck several times always buying the same belt. The last two times I replaced the belt , the belt seems to be to long for the deck. It is loose and does not tighten up right when the deck is ingaged causeing the blades...
I'm having problems with the steering on my troy bilt mower. It turns left OK but when you go to turn right it seems the steering gears are not connecting. I sent it in to change the d upper and lower drive belts and they also changed a couple of pulleys. When I got it back the steering seemed...
View more questions Search
|
