Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
2 switches 1 power source from an outside light
[ 2 Answers ]
Power source is coming into switches from the light. Want to run power to a second light from the switch. How do I jump the power source. Using 14/2 already run. Don't really have a choice to replace
Wiring an inside light and an outside light one power source and two switches
[ 4 Answers ]
I want to wire an inside light and an outside light with two switches and one incoming power source. With the two switches are in the same box
Wiring switch and gfi with one power source in
[ 1 Answers ]
I need to make one ground fault outlet and one switch to a vainity light using one powersource. The power source comes into the switch box as well as wiring from the gfi box and the wire from the vanity light. I created two pig tails off the power source hot (black wire), one is connnected to the...
Electrical power source in house wiring
[ 1 Answers ]
How do you determine if the power source is coming to a ceiling fixture then to the wall switch or vise-a-versa.
Wiring double lighting switch, one source of power.
[ 0 Answers ]
I would like to wire a porch light to one switch and a ceiling rose to the other switch. I have three cables into the fitting wall box, each with a black wire, earth wire and red wire. Only one of the cables carries power on the red wire. I believe one of the cables is the switch wire... View more questions Search
|