Ask Experts Questions for FREE Help !
Ask
    simpleiree133's Avatar
    simpleiree133 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 1, 2013, 07:50 AM
    Wiring for in-sink aerator ss200, 3 phase, 208v, 60 hz
    How to wire in sink erator ss-200, 208v,60hz, 3ph
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 1, 2013, 01:09 PM
    "wiring for in sink erator ss200, 3 phase, 208v, 60 hz". If you Google same, you will find the installation manual for your disposal.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Aug 1, 2013, 01:57 PM
    how to wire in sink erator ss-200, 208v,60hz, 3ph
    Easy. Just go to Google and enter "Electricians in <your city>".
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #4

    Aug 1, 2013, 02:55 PM
    Can you get just a little more vague? Please tell me you are not an electrician.

    To begin with 208 3 phase will kill you if you don't know what you are doing. So if you think that this is a simple DYI project you are wrong! Best suggestion I can give you is to get a licensed electrician to do this work.

    With that said, are you installing the proper "Insinkerator" Control Panel for this model or are you planning on connecting just the "SS 200" model directly to an electrical source?

    If you are connecting directly to a 208, 3 phase circuit then you need to begin by calculating the motor circuit using NEC 430 FLC tables to start sizing the conductors, protection equipment and required disconnects.

    The actual phase conductor connections to the device are fairly straight forward and are covered within the "Service Manual" for this model.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is it a 3 phase 208V or 1 phase 208V system? [ 1 Answers ]

From a NEMA L6-30 3-prong connector in the lab, it measures 212V btwn two prongs and 122V btwn any of the two prongs to the third prong. Based on this info alone, is it a 3 phase 208V system or a 1 phase 208 system?

How to go from 200Amps/208V/3 phase to 600Amps/480V/3 phase [ 2 Answers ]

I am starting a business and have equipment that requires 600Amps/480V/3 phase, but the site I want to rent has only 200Amps/208V/3 phase. Is there anything I can do to get the required power on that site? Any equipment I can buy to achieve this goal? I understand it may be costly. Thank you.

208v 3-Phase [ 1 Answers ]

Hello, We have a 208v 3-phase panel in our server room filled with 20amp circuits. We would like to change them to 30amp circuit that goes to the twist lock circuits so we can plug in bigger equipment. If all possible. What I can’t figure out is how many 30-amp circuits we can get in the 208v...

208v single phase wiring [ 1 Answers ]

How do I connect a 208v single phase appliance to my home circuit panel? I installed a 30amp breaker which has 2 connections, red and black (hot), then I have white (neutral), and green for ground. The device only as 2 connectors not 3, plus ground? Thanks

120v/208v single phase appliance wiring [ 2 Answers ]

Recently purchased a coffee machine that has the above reqts. I understand that it has 220 and 110v circuits that need power. I also purchased a generator to power this brewer outside. If I use a NEMA L14-30P plug, to connect into the generator, What is the sequence of wiring for the plug three...

View more questions Search