Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heat pump fan will run on manual but won't run on automatic
[ 0 Answers ]
The fan that puts the air in the house won't run at all on auto. But you can put it on manual or on and it will run. Service man said when he checked it out he couldn't find anything wrong. He suggested we get the power company to check the transformer on the pole but all of that checked out as...
My York Furnace Fan doesn't turn on when I want fan only feature otherwise works.
[ 1 Answers ]
My furnace runs but the auto pilot does not turn on whatsoever? I changed the batteries in my thermostat. I tried switching from heating back to cooling. Air conditioner works fined. I cut power at circuit breaker to furnace waited for 2 minutes and then turned power back on, but I still can't...
My York furnace Fan doesn't turn on when I want fan only feature otherwise works.
[ 7 Answers ]
My York Furnace Fan doesn't turn on when I set the thermostat to fan only otherwise it works during the heating cycle. When someone sets the thermostat to fan only for me while I am in the basement oserving what happened I hear a click and then a red light flashes briefly on the White Rodgers...
Wiring a ceiling fan in middle of run, outlet at end of run
[ 5 Answers ]
I am wiring a bedroom ceiling fan and just needed someone to help me figure out part of the wiring I'm not sure about. The goal is to have a 2 gang switch control the light and the fan separately. The switch is at the beginning of the run, then the ceiling fan, and then I also have an "always...
New Compressor Run OK. HVAC Fan only run in Heat mode.
[ 15 Answers ]
This board is awesome. I have done some reading first on here. Here's my case: Compr runs fine. Fan on HVAC blower inside runs only in Heat mode. Not on Cool. Not even on "FAN-ON" as opposed to FAN-AUTO. Can this be an issue with relay and board within HVAC? Per other thread, it was talking... View more questions Search
|