Ask Experts Questions for FREE Help !
Ask
    paul shawa's Avatar
    paul shawa Posts: 1, Reputation: 1
    New Member
     
    #1

    May 23, 2013, 02:57 AM
    Electrical high voltage switch gear
    What is the reason for reducing current settings on circuit breakers on a radial feeder when sectionalising

Check out some similar questions!

Can you use a regular wall light switch, when it says need a low voltage switch [ 5 Answers ]

Can you use a regular wall light switch when it says use a low voltage switch

Generator voltage too high [ 3 Answers ]

I have tried everything to lower this voltage . Rpm and cycles are good , I've changed the voltage regulator, checked windings and exciter field. I was thinking about putting a resistor inline to reduce this high voltage problem. T he generator is a generac 7000 EXL 12250 surge. Please help. [...

High voltage cable [ 1 Answers ]

1. Is it smart/legel/safe to disconnect a 7,000 volt under ground cable without disconnecting the power? 2. Where or how would you store the hot cable? 3. Need to prove this is a DUMB idea.

High voltage of electricity [ 4 Answers ]

Does anyone know if high voltage will generate high electric bills. I live in Jamaica and the voltage is 110. (220 for large equipment) My surge protector is giving an abbormal reading because my voltage reading coming in from the meter/transformer is 117 volts (not the 110 that my place is...

Electrical voltage [ 1 Answers ]

Why would an enduced over voltage occur and what damage may occur if this happened while working on an unprotected computer


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.