Ask Experts Questions for FREE Help !
Ask
    Gary Newman's Avatar
    Gary Newman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2013, 04:31 PM
    Hamton bay fan remotes how to install to on existing fan
    the fan does not have a switch to agjust the fane speed and there is not a light wire that goes to the top of the fan.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Apr 21, 2013, 08:57 AM
    Please give me some help here.

    How is the fan activated now, by a wall switch? How old is the fan, just curious?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hamton Bay Fan - Noisy [ 2 Answers ]

The remote control works fine. My problem is a pulsing noise which is loud on high speed and less on each of the other speeds. The blades remain constant on which ever speed that is chosen. I'm looking to find the cause of the pulsing noise. Is it the receiving unit for the remote? Thanks

Hamton Bay Fan Will Not Turn On [ 6 Answers ]

I recently purchased a fan from Hampton Bay - The Caswyck. It was working fine for a few days until the up lights suddenly stopped working. I called the mfg. and they sent out a new receiver. I replaced the old receiver but now I am not getting any power to the fan. I entirely removed the new...

Replacing Receiver on Hamton bay fan [ 2 Answers ]

How do I replace the receiver on a Hampton Bay Fan without pull chains?

Hamton bay fan remote [ 1 Answers ]

When I turn the fan light off with the remote ,it goes out and it comes back on by itself .

Hamton Bay Fan - Windward II [ 2 Answers ]

I have six of the above fans and the lights ontwo fans have stopped working. The fans are approximately 2 yeas old. I have tried new light bulbs wit no affect. Does anyone have any ideas as to what to try next? Thanks in advance, Ed

View more questions Search