Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Closed loop Chilled water system - pressurisation units
[ 18 Answers ]
Hi all , I am new to this site... Could you please some one help me out to locate the pressurization unit for a chilled water system application in 120m tower building. The heat exchangers/CHW pumps are located at 0.0 level... System volume is about 35-40 m3 and pump head is around 4 bar... ...
Chilled water pump for HVAC
[ 15 Answers ]
Kindly let me know what pump I should use for a chilled water close loop system where required flow rate is 102 m3/hr and the max. hight of building is 100 ft.
Chilled water pipe
[ 3 Answers ]
I am very new to askmehelpdesk.com. My question is, The building height is 300m. There are 6 chilled water risers going up to 125m height. The chilled water flow rate of each riser as follows. Riser 1 & 2 - 150l/s Riser 3 & 4 - 180l/s Riser 5 & 6 - 100l/s Chilled...
Aircondition Unit Dripping Water
[ 3 Answers ]
The pipe that runs from my air condition unit to the outside of the house is dripping water. I went into the attic and the unit is dripping water from the corners at the bottom. What could be the problem and how to fix it? View more questions Search
|