Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper wire sizing?
[ 3 Answers ]
We are re-routing the supply line to our pump house, where there is an extension panel with 30A 220V (pump controller) and 15A & 20A 110V breakers. It's about a 60' run from the 200A main service in the house, being placed in conduit 2' underground. The wire in place is newer 10 gauge solid copper....
Wire sizing for sub panel.
[ 1 Answers ]
Thank you for the response on my sub panel questions. I finally found a slim line breaker which will work in my main panel. I can now consolidate two breakers to give me room for a 100 ap breaker. This breaker will feed the sub panel in my workshop. I plan on placing a 100 amp sub panel in the...
What is the cable/wire gauge (product name) for installing 200 Amp Service Entrance
[ 1 Answers ]
I am installing a new service entrance to upgrade my home electrical service to 200 amps. 1 Please tell me what gage wire is required from the meter to the weather-head? The service panel with main breaker is inside the laundry room 25 feet from the outdoor meter loop. I will run the...
3-wire home, 3-wire fan, 2-wire remote
[ 9 Answers ]
Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....
3-way switch with 2-wire cable
[ 4 Answers ]
We just bought a new house, and after painting, I've been replacing all the outlets and switches. As I was replacing a couple of 3-way switches, I saw that the previous owners used just 2-wire cable between the 3-way switches, using the bare ground as the traveller wire. This is obviously not... View more questions Search
|