Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant 80T will not heat. Hot surface ignitor does not glow. What's wrong?
[ 1 Answers ]
Bryant 80T will not heat but the blower runs. The Hot surface ignitor does not glow red and there are no wires running to the Flame Rollout Switche. How do I solve this problem and get some heat?
Blower works but ignitor won't glow
[ 1 Answers ]
Changed the ignitor and thermostat on a goodman furnace. The fuse is good and the indicator light says that everything is normal. Should I start with the control board first?
Picture of ignitor & location of ignitor
[ 1 Answers ]
What is the location for an ignitor on an amana furnace model # guc070c30c?
Furnace ignitor doesn't glow
[ 0 Answers ]
When the stat calls for heat the blower runs for a while then shuts down, then the inducer runs for a while then shuts down, at no time does the ignitor glow. I put a meter on the wires going to the ignitor and found no power during the start up sequence. Also error code 32 flashes.
No Ignitor Glow
[ 8 Answers ]
Not sure the brand.. When I have the thermostat call for heat the vent blower and the blower both come on and there is no glow.. I have tested and bypassed the limit switches and that doesn't fix the problem. Now the diagnoses light flashes 4 times which is supposed to mean that there is an open... View more questions Search
|