 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
You will need to determine if your breaker box has the capacity to add the oven. Most household ovens are 120/240. You will need a 3 or 4 wire depending on what the manufacturer calls for and whether this is a replacement or new wiring. Give us more detail please.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I need to connect a electric oven 208v 1 phase 2 wire + gnd and I don't have a 220 outlet what can of wire I need and witch breaker I may need to
I have a 5000 watt generator that I want to hook up to power my well and some lights and refrigerator for the next couple of days until power is restored. The generator has a 240 volt outlet which I have a plug and cable for. The cable ends in 4 wires: black, red, green white. The dryer outlet and...
I would like to run a 220 line from electrical panel Box to an outlet for a table saw.what for breakers And what gage wire should I use I will be about 20FT From panel? The saw motor is a 2hp 1 phase, runs at 3450 rpm And draws 10.2 amps
I have a generator that has (2) 20 amp 110 outlets and (1) 240 outlet. The 240 outlet have receptacle for four wire plug but I want to use it in a three 930 wire 240 volt plug at other end. Is this a workable solution?
Ok I have what I thought a simple project.. ok I have a 5K watt generator that has a 240 v outlet.. I want to connect my 240 v arc welder to it.. only problem is that the plugs are different.. I already have the proper plugs to adapt the connection.. I made a one foot adapter ( pig tail )... my...
View more questions Search
|
