Ask Experts Questions for FREE Help !
Ask
    mburnett's Avatar
    mburnett Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2012, 06:25 PM
    Coleman Furnace Troubleshooting blower
    When the unit is turned on the blower is very slow and gradualy gets slower thenstops completely
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 13, 2012, 06:30 PM
    If the blower motor has a capacitor, the capacitor could be bad. They are cheap & easy to replace. It's worth a try.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace troubleshooting? [ 5 Answers ]

The regulator clicks and the furnace does not light.

Coleman 3500 Furnace Troubleshooting [ 1 Answers ]

The fan will not kick on. Replaced the motor and fuses, still nothing and freezing been 2 days now

Troubleshooting coleman furnace a/c unit [ 0 Answers ]

Cooler runs all day long keeps temp at 79 with outside temp at 95 to 100 everything seems to be normal but I don't think it is putting enough air through the duct or vents has clean filter. When it was new it kept up with no problem. Checked freon and it is OK

Troubleshooting Coleman Evcon Furnace? [ 1 Answers ]

I have a coleman evcon direct vent forced air furnace (gas with electric ignition). The motor runs, but it does not ignite. The blowers work fine on fan mode but will not ignite or blow on auto. Any suggestions?

Coleman gas furnace troubleshooting? [ 0 Answers ]

Coleman gas furnace model#DGAA077BDTA having multiple trouble codes flash, but here's what its doing; system works fine self ignitor switches on the gas switch clicks on the gas ignites stays on for about 40-60 seconds then gas switch clicks off flame goes out fan stays on code flashes 4 then 6...

View more questions Search