Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Closed loop Chilled water system - pressurisation units
[ 18 Answers ]
Hi all , I am new to this site... Could you please some one help me out to locate the pressurization unit for a chilled water system application in 120m tower building. The heat exchangers/CHW pumps are located at 0.0 level... System volume is about 35-40 m3 and pump head is around 4 bar... ...
Chilled water pump for HVAC
[ 15 Answers ]
Kindly let me know what pump I should use for a chilled water close loop system where required flow rate is 102 m3/hr and the max. hight of building is 100 ft.
Hot water pipe touching fire sprinker pipe
[ 6 Answers ]
I discovered why the water pressure in my fire prinkler system kept rising. It's because the hot water pipe is right up against the sprinkler pipe causing it to heat which then increases the pressure. Now can I wrap the pipe with insulation. Would this be a good fix? If so, should I wrap the hot...
Water pipe knocking when hot water used
[ 1 Answers ]
I just brought a house six months ago and this winter when I turn on the hot water and run it about 5-10 minutes. The pipe like knocking the dry wall or something. After about 5 minutes it will stop. Usually this occur after shower or large amount of hot water is used. I am wonder this will be... View more questions Search
|