 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Does anyone know why my new boiler is making banging sounds (like metal on metal)
Hope someone can help me! I just got a new boiler (heating) installed in my house to replace the old one I had. I have both radiant and baseboard heating in my house (radiant on main floor and baseboard upstairs). I do not hear any noises on the main floor, but I hear intermittent loud banging noises (like metal clanging on metal) upstairs. I can hear it coming from within the walls and occurs most frequently and loudest during the coldest part of the night.
I haven't been able to sleep for a while and I just spent lots of money on this new heating system. Installer suggests ripping out the walls and insulating the pipes and is going to charge me an arm and leg. Can someone please tell me what the problem is? I don't have enough money to do what he is suggesting and I'm desperate for some much needed sleep... Sleep Deprived in Seattle |
||||
Check out some similar questions!
Can all you install a deadbolt in all metal doors. Or are there some with foam core construction that you should not attempt installing a deadbolt. If it is possible on a metal with foam core residential door (1987 construction) Do the screws that hold the deadbolt to the edge of the door...
Our garbage disposal stinks. I bought some balls that are suppose to take the smell away but it only lasts for a little bit. Also sounds like there is a spoon or something when you turn it on (metal grinding noise) I have put my hand in and felt around but can't locate anything. Do you have any...
Metal is not copper. Also, does anyone know what the overhang should be (for shingles on bay window roof). Thanks
GE hot point dryer. Front of drum is scraping on the front panel it seems. I can pin point the noise as coming from the area near the blower. It does not appear to be the blower. I have replaced the glide strips and ensured the felt sealer is in seemingly good condition. However I can see some...
I have a 1994 Nissan Altima GXE. I had some brake work and front wheel work done around Christmas time. The control leg, an axle, and some other small things were replaces, along with the entire brake system. However, when I turn left or go in reverse, I hear this shrill, metal on metal sound that...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
