 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring help for Honeywell rth7400D
I just bought a new Honeywell programmable thermostat. The wires on the wall don't match the wires on the unit.
Coming out of the wall, I have G, Y, W, O, B, RH. I don't have a heat pump, but I do have a trolatherm on my forced air system. |
||||
Check out some similar questions!
Converting from a Baystat240a to a Honeywell RTH7400D
[ 0 Answers ]
Hello I can't seem to get the connections hooked up properly, if the air comes on it does not seem that cold and my ac unit will start to hiss after about 90 seconds. Here are my colors Red Brown Black Blue Green Yellow White Orange If I hook up the Orange to the O/B (W) connection then...
Installing Honeywell RTH7400D
[ 8 Answers ]
I am installing a Honeywell RTH 7400 D. The old thermostat did not have lables on the wires. There is a Red White and Blue Wire. I believe the Red will go the Rh and the White to W but I do not know where to connect the Blue.
Wiring Honeywell RTH7400D from an older thermostat config
[ 1 Answers ]
Hi All, I have a TRANE BAYHTR1408 (TWE030C14FBO) heating and AC unit. The old connection wires were as follows wire color = letter red = R yellow = Y/Y2 green = G blue = C
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
