 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Contactor does not hold in heating mode
I have a mobile home with electric heat, the contactor makes a clicking noise and the blower comes on intermittently, I changed the contactor, and noticed it was worn out, but the unit does the same thing, can it be a bad transformer?
|
||||
Check out some similar questions!
Pretty much what the title states, I have a Bryant gas pack that operates like normal when it is in cooling mode, but once the thermostat calls for heat, the system shuts down completely. Even the fan doesn't work. Can anyone list the possible reasons this would happen?
Power is on, circuit breaker is fine, 120 V is present at door switch and to the board, 24 Volts present at transformer, Thermostat is returning a 24 V at the white wire when it is set to a temperature higher than room temperature and set to Heat and Fan on Auto. Nothing happens, the red LED...
My outside heating/air unit will not turn on . I opened the panel and if I push this little spring loaded thing it contacts with a small circular object and the unit kicks on, when I release it turns off. It's a brand new unit, about 5 or 6 months old. Can I fix the problem myself. Repair guy can't...
The furnace is an older model Carrier. I do not know at this time the exact model. It is at this time about 20 years old. The central air is a newer Carrier Performance series model. It is two years old. I have checked to make certain the blower moves freely; it does. The blower in the...
How do I check to see if the contactor needs to be replaced on my nu-wave spa supreme series (2 pole heating element)? There is no power coming off the side that conects to the heating element.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
