 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 80 plus furnace error code 31
I have a bryant 80 plus furnace that is about 12 years old. It is giving me an error code of 12 which is blower on at start up after a call for heat. The blower runs for about 90 seconds then shuts off. It then gives me an error code of 31 which sent me straight to the pressure switch. When I checked the pressure switch for voltage I had none, so I changed it out and I'm still getting the same code. Any ideas?
|
||||
Check out some similar questions!
On a Bryant Gas Furnace what is error code 34?
I have 9 year old Byrant 90 Plus Furnace, not working, on LED Code is 31. Need help to resolve th eissue.
My Bryant 310 furnace is flashing error code. 3 quick flashes, 3 long flashes. What does this mean?
I have a Bryant 350MAV048100 furnace. It runs for 15 minutes, cycles off and then cycles on and shows an error code 31. I've cleaned out the intake /exhaust lines, but still have the problem.
Less then a year old. I'm getting an intermittent 42 error. After turning the power back on to the unit it goes through its self check mode and goes back to a constant light, indicating no problems. Then a day or two later 42 again. Both intake and exhaust pipes are clear, new air filter. Any...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
