Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pilot light on our Lennox G40UH(X) Series furnace won't light
[ 24 Answers ]
The pilot light on our Lennox G40UH(X) Series furnace won't light. We went through the steps to restart the furance. The blower turns on for a few minutes but blows cold air and the pilot light never comes on. How can I fix this?
Lennox G40UH running when not required
[ 1 Answers ]
I have a 5 year old Lennox G40UH gas furnace. The furnace runs for short periods (2-3 minutes) 10-15 times per hour. This happens even when the house temp is above the thermostat setting. I have replaced the thermostat but the problem continues. I have checked the diagnostic lights before, during...
Lennox g40uh - delayed ignition
[ 0 Answers ]
G40UH lennox is about 3 years old, the heat on message comes on , but sometimes it takes a long time before it fires up? Any suggestion of what the problem could be?
Lennox G40UH(X) series - blowing cold air outside
[ 3 Answers ]
Lennox G40UH(X) series - blowing cold air outside - would like to know what I can check before having to spend money for service to come check it? Can I check filters, fans, wires, etc?
Blower does not run automatically on lennox g40uh(x) furnace
[ 0 Answers ]
The thermostat sends the signal for heat and the exhaust fan goes on, but the blower fan does not start and the furnace does not ignite. The fan blower does work if I manually turn the fan to on (instead of auto) at the thermostat. I tried tapping on the limiters, but it doesn't seem to help. ... View more questions Search
|