 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Winterize sprinkler system
I have a FEBCO 765 BFP and 7 zone sprinkler system needs to be winterized.
I hooked up a 21 gallon compressor at 50psi output to one of the test cock on the BFP，shut off the inlet water to the sprinkler system, opened the ball valve on the test cock, then manually turned on the valve one zone at a time, but there is no water blowing out. Can anyone help me with this problem? |
||||
Check out some similar questions!
I'm new at this. I'm planning to put in a sprinkler system, but the flow rate in my house is only 6 gpm. Tapping in near the water meter is not an option, it's on the other side of the driveway. So I have to tap in from the basement and out. Is there a way to increase the flow rate? Thank you.
Hi I have a new cottage with a Provectr water treatment system (Myers) that includes a venturi nozzle assembly, an aerator/precipitator assembly, a filter tank with control valve, a second tank with control valve (Water softener?) and a tank-brine assembly. I would like to know how to...
Hello, My sprinkler system runs off an irrigation well system with a bladder tank. The well has a 1HP Jet pump that will only pump 8 gpm @ 40-60 psi. As the system runs after 3-4 minutes the pressure will drop to 20 or so psi and the sprinkler heads start to drop. So I'm not getting enough water...
My sprinkler system here in SW Florida is two years old. There are 5 programmable zones. However, lately whenever zones 1, 2, 3 or 4 are programmed ON, Zone 5 comes on (sympathetically?). An irrigation company has come 3 times to make repairs, but has been unsuccessful each time. They gave up and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
