Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hairline fracture cast iron waste line
[ 1 Answers ]
Here is the situation. I am installing a bathroom in the basement. Recently cut a section out of my 4 inch main line under the basement slab which is cast iron. The cast iron was installed in the 1930's and of course is old and brittle. Unfortunately, my first cut was made with a reciprocating...
Cast iron soil pipe
[ 1 Answers ]
Hi I would appreciate very much if someone could clarify some questions I have on oakum/lead joints I have 3 horizontal hub and spigot joints to repair on 4" cast iron sewer pipe. The pipe itself is @ 5 years old. I would like to know if this is the correct way to solve this problem... ...
Lead Pipe/cast iron
[ 4 Answers ]
Hi! I just removed drywall to fix a drain from a bathroom sink. I found 1.5" soft lead pipe from the p-trap to a 3" hub on the cast iron stack. Can I use some kind of coupler from the lead pipe to new plastic or do I need to replace the entire length of pipe? If I need to replace, what's a good...
Cutting cast iron pipe
[ 7 Answers ]
Hi, I have a project I am working on in the basement and I need to tie 3" plastic into 3" cast iron. I will be renting a ratchet type cast cutter. The cast comes out of the basement floor and goes straight up to serve the first floor bathroom. What I would like to do is cut a section out of the...
Cast iron or PVC waste/drain pipes?
[ 5 Answers ]
Hi everyone. I'm in the middle of a major remodel to my 1947 home, including adding a second story. We're trying to do everything top-notch, which leads me to the experts here. Here's my question: For the waste/drain pipes, I know we want to use cast iron in the drops between the floors (for... View more questions Search
|