 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lost power to thermostat
Turned heat on at thermostat, ran and heated house for a day then noticed no display on thermostat. Checked breakers, none tripped, turned breakers off and back on. Waited then had power to thermostat, lasted two days and now back to no power to thermostat. Reset breakers, turned off and on several times. Nothing!
|
||||
Check out some similar questions!
We had a storm, and the power flashed to the house. It was only off a few seconds, then everything was normal. I felt the temperature rising in the house, and checked the thermostat. It was blank, so I replaced the batteries and still nothing. It is a Hunter programmable about 11 years old. Any...
Had lennox ac wiring repaired (chewed by mouse). 2 months later unit keeps losing power. If we jiggle unit it will run again. This sounds like a loose connection in the wiring. Checked where repair was made and all seems tight. Any ideas where to check next? Do not want to spend another $300...
This is about hvac units: how is a transformer connected to get power and then give power to the thermostat And where is the transformer excactly - lets say on a residential a/c unit with gas furnace
I lost power to just two outlets, no tripped circuits. What could be the problem?
My 4yr. Old Carrier heat pump shows no power to the thermostat therefore, nothing works. Checked the breakers and they show good. Could there be a circuit breaker on an internal board somewhere?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
