Check out some similar questions!
Ask a mechanical engineer a question
[ 4 Answers ]
I have 2 wheels and on each I have an 18 tooth sprocket run with a 40 chain. Each wheel and sprocket is connected to a main drive shaft with an 18 tooth double sprocket on it. The sprockets on each wheel are linked to the main drive shaft by a single strand ANSI 40 roller chain. One wheel is...
Ask an engineer a question
[ 1 Answers ]
Someone I know has a Maico that's been standing for ages, he wants to start racing it again. It's a Hagon Maico grass track bike so it runs on methanol.
Ask an engineer a question?
[ 0 Answers ]
My name is Mr. Horton I'm looking for a dc to dc step up converter or what ever you might know that can do what I'm requesting.I have a controlled range of input 12-15.8v dc 1,260 amps. I need output 72v dc 550 amp,108v dc 550 amp,144 v dc 460 amp,192 v dc 600 amp,144 v dc 250 amp. Can 1 or all of...
Ask a mechanical engineer a question?
[ 0 Answers ]
Hello. I need to create a pump-like mechanism that will wave a piece of light silk fabric. The result will be the fabric attached to the wall horizontally and be undulating up and down. This is for a sculpture. Thanks View more questions Search
Add your answer here.
|