 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have ran a 12/2 up to a point where I want to power two 1500 (240v) watt baseboard heaters each running off a separate thermostat. Each heater will heat a separate room. I have double-pole wall-mount thermostats. Do I split my 12/2 and go to the thermostats or is there another way this should...
I have Federal Pacific thermostats and baseboard heaters and I am in the process of replacing the thermostats because they stick on. I have an 18 foot by 18 foot room which contains a 10 foot length heater and is fed with 240 volts. I would like to use programmable line voltage thermostats. How...
I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I would like to use only one 240V #12 2 wire circuit running two heaters at a total of 3800 watts. I plan to use 2 pole 20A breakers and 2c #12 wire. I would like to have both heaters controlled...
I have two sets of cables in the wall box. They each have one white wire and one black wire. They are not marked. Only one of the black/white wires that come from one of the cables has power (120volts) the black and white wires from the other cable don't measure any voltage. The thermostat I...
Mayby you gyes know this one. I have a nice sized room that is heated in the winter by 3 220 volt 20 amp heaters that are set in the wall and each one is on there own circuit. The problem is that all they have for controlling them is low, medium, and, high. I would like to put them all on a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
