Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Flagstone patio using sand mix
[ 2 Answers ]
Can I use sand mix dry to fill in the cracks on my flagstone patio? I'd like to broom it in and then lightly mist it
How do I do heavy knock down ceiling texture,step by step an do I mix sand in with
[ 1 Answers ]
How do I do a heavy knockdown on a ceiling,I have a sprayer but just can't figure out what I am doing wrong,do I need to mix sand in with the joint compound,
Mason Mix to Sand Ratio
[ 1 Answers ]
I'm re-laying a small brick wall down my driveway. The bricks are basically 4x8x16 cap blocks laid on side. They're old bricks though and look like exposed aggregate concrete and not just concrete block material. I've done a little bit of work like this before but as I'm definitely a novice,...
Sand Filter is blowing out sand into my pool
[ 3 Answers ]
Lately when I backwash my above ground pool, the filter blows out sand into the water. What causes this? When backwashing the filter, I turn off the pump, turn the dial to backwash and turn the pump on low. Is the pump supposed to be on during the backwash and rinse cycle?
Morter vs Sand Mix
[ 3 Answers ]
What's the difference between morter and sand mix? While I'm asking there is type N and Type S morter. My application is building a concrete shower curb and base, to eventually be tiled. Thanks View more questions Search
|