Ask Experts Questions for FREE Help !
Ask
    Marmot's Avatar
    Marmot Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 6, 2012, 12:48 PM
    Dsc night zone
    I am using a 1864 panel at home. I've programmed zones 1 - 9 as 05 (Interior Stay Away), Zones 10 - 12 as 37 (Night Zone)

    I arm the system in stay and then I press *1. Then all the zones are activated even the night zones.

    Is there possibly any other setting I must set to activate this feature.

    Thanks

Check out some similar questions!

I have a duel zone heating system zone one doesn't work but zone two does. [ 0 Answers ]

I already replaced the circulator and thermostats. This is oil fired furnace with baseboard heat. T he pressure on the furnace is running about 30 psi

Weil Mclain 18yr old furnace - 1 "failed" zone of a 4 zone forced hot water system [ 0 Answers ]

I just bought a house that was built in 1993 and has a gas fired Weil Mclain furnace, forced hot water, with 4 zones - each with a Taco Zone Valve. The system also has one circulator pump. In late fall, I ran the system and all zones worked fine. When winter came and system was on 'full time', it...

I have a weil-mclain boiler. The zone valve opens but no heat in zone. What do I do? [ 1 Answers ]

Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do?

DCS PC1832 Programming (Night Zone) [ 7 Answers ]

I just had my system installed. I have a numeric keypad only. I am a programmer by trade, but not this systems. I program business systems. I would like to program some ZONES as Night Zones. So that when I use the Interior Stay mode and press the command I would get some additional (Nigth)...

2 zone oil heat, 2nd zone runs 1st zone [ 1 Answers ]

Hi, We have a 2 zone oil burner. The 1st zone (upstairs) runs separately and works no problem. The 2nd zone(basment), when we try to run 2nd zone separately , it seems to run zone 1(upstairs) and the baseboard heating upstairs gets hot and heats zone 1 even thought we have the t-stat set low...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.