Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Overhead from a 100 amp service panel to a 100 amp subpanel in a garage.
[ 6 Answers ]
An Electrician friend said I could use #4 copper for the (2)120 volt legs and a conventional Suspension wire as the nuetral. The overhead span is about 35 feet and the overall run From panel to panel is about 70 feet.The supply outlet said to use #2 copper. Also, what type wire for sunlight...
100 amp main, 100 amp service wire, 200 amp sub panel?
[ 2 Answers ]
I am moving my sub panel and upgrading to a 200 amp service, but in phases. The first phase is to move the panel due to some remodeling. I want to put a 200 amp panel in the laundry room with a 200 amp breaker. I have 100 amp feeder wire going to it (AL 2/2/2). Outside I have the meter can and...
Can a 150 amp meter panal handel a 100 amp, 40 amp, 30 amp and 30 amp brakers.
[ 2 Answers ]
My meter panal is a 150amp panal. I have a 60 amp sub panal coming off it a 30amp to my stove a 30 to dryer and a 40 to the a/c. i want to upgrade the 60 amp sub panal to a 100 amp panal. Will the 150 amp meter panal handel it or do i need to have a 200 amp meter panal installed
100 amp service split into two 100 amp sub panels?
[ 5 Answers ]
Hello! I am in the early planning phase of a project to add a 100 amp sub panel to my detached garage. This new sub panel in the garage will be used to charge electric vehicles. The current and only sub panel is installed in the kitchen and is directly wired to the 100 amp service box breaker... View more questions Search
|