 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Genie pro 88 won't open
I have a Genie Pro 88 with no infrared sensors. It will close just fine, but I have to open it manually. When I push the button to open, the motor spins for a split second then stops. If I open it manually, then it will close remotely with no problems. Any ideas anyone??
|
||||
Check out some similar questions!
My Genie Pro 88 closes, but does not open. I can hear clicking coming from the black little boxes (on the circuit board) and the lights come on, but it will not open. I also checked the jumper plug and the connection is perfectly fine. I also checked the grounding points and they are all secured...
My Genie Pro 88 only opens and closes with the remote occasionally. I have cleaned the unit and tightened the screws. It works perfectly pushing the button, but with the remote it ddoesn't always respond. Can you please help me ?
My old Genie Pro 88 clicks and the light comes on but won't open--intermittent, sometimes works sometimes not. I see no adjustment screws anywhere on this thing.
I have screw type genie pro88 model.It does not have sensors mounted at each side of the door.The door only open half then the door stopped (I have to hold the opener's bottom all the time).If I press the bottom again, the door go down couple inches then go forward couple inches. If I press it...
I have a Genie Pro 88 Garage Door Opener. It had a hard-wired opener on the outside of the garage and I also had a portable opener that I kept in my car. Everything was working fine and then one day, I hit the button on the opener in my car & the Door opened only a little bit then went down. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
