 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
1993 Camry wide body xv10 cutting out?
Hi, new to this but very sick of the car cutting out so worth a shot! Have been to several mechanics for no luck and don't want to throw money into it!
Basically, car runs fine most of the time as I only drive a small distance to work! However when it's warming up sometimes it starts to rev high and it feels like a delay in the accelarator! When in stop start driving, it wants to stall and if it does stall will not start for 5-10 minutes, then puts until you give it some revs... Also does not start after driving for 20 minutes turn it off, go to turn it back on and won't fire. To me it seems it needs to be cold to run well? But not sure, as it doesn't happen all the time... Help or suggestions appreciated? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My camry sometimes start after a long wait.aditionally runs bad.the light of check engine is always on.I put new the distributor'the fuel pump;fuel filter;battery;spark plugs;spark plug cables;please help
My 1993 camry speedometer and odometer stuck, what is the problem?
I change my wires & spare plugs the dist.cap the firing pin and a new batt and my 93 camry still won't start
My 1993 toyota camry will not start. Will turn over but is getting no fire. Have tried module, distributor, and fuel pump. What's next? Can someone help me?
I just bought this car not running. It turns over fine, has fuel pressure if I jump B and FP at the diagnostic plug, has spark, has correct timing of cams and distributor, has voltage to the injectors, but I think it isn't getting the signal (pulsed ground) from the computer to tell the injectors...
View more questions Search
|
