Ask Experts Questions for FREE Help !
Ask
    candreasen's Avatar
    candreasen Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2012, 06:51 AM
    Power winch performance
    A 1,000 lb dead weight was lifted 36 ft in the air with a cable on a dc powered winch. How can I duplicate the stress (power consumption and temp rise are monitored) on the winch without having 36 ft of vertical space in my building? Thanks for your help!. Carl
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 20, 2012, 07:24 AM
    A 36' hole in the floor would be another option.
    You may just have to take it outside, likley safer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Calculation length winch drum [ 1 Answers ]

I tried to find my diameter rope 88mm then I need to find the length drum is any help?

My 98 Dakota is a temperamental little winch! [ 4 Answers ]

Ok, I have a problem that has been going on for at lest 2 years now, and no one can figure it out. Basically, I can start my truck at any time, day or night. In any weather, etc. Then I can drive the truck 1/4 of a mile, or 400 miles, it dose not matter. When I shut the truck off, lets say to run...

Difference b/w winch and hoist [ 0 Answers ]

What is difference b/w winch device and hoist device , these are concerned with crane

12 volt winch /110 [ 12 Answers ]

I have a 12 volt power winch that I use to pull a travel trailer back into a tight parking spot. It would be much easier if I could just plug it into 110 volt outlet instead of carrying a 12 car battery out to the back yard and connecting the aligator clips from the winch to it. Is there a 110...

View more questions Search