Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Where is the fuel injection release valve on a 1995 Chevy Blazer vortec motor?
[ 1 Answers ]
I went to leave one day truck started just fine then died like 40 sec. Later while I was letting warm up. Its acting like its out of gas but I put a gallon in still won't start
93 Chevy Blazer 4.3 vortec not shifting
[ 6 Answers ]
I have a 93 Chevy Blazer 4.3 vortec engine. I started having a problem shifting a year ago. I have changed all solenoids, wiring harness inside case, filter, pan gasket and of course fluid. Only saw very little metal inside pan when I opened it. Changing the fluid is what originally caused a no...
93 chevy s10 blazer 4x4 vortec, transmission pan removal?
[ 2 Answers ]
Any 1 know how to remove the trans. Pan to change the filter and leaking gasket? It has a cross member going from 1 side of the frame to the tramsmission, the to the other side of the frame , and if it was moved like 1 inch I could get the pan out, but not sure if that's safe Any 1 did...
My 1995 chevy blazer won't start
[ 2 Answers ]
I have an old one, a 1995 chevy blazer. It stopped one day and I have been able to get it start since. We changed fuel fliter, spider injector pump, and fuel pump in the tank. I checked to see if fuel relays are working and they are. The pump in the tank is working, while changing the filter we...
New chevy vortec 5.7 350
[ 2 Answers ]
I have around 800 miles on my new vortec 350 motor so when I go to power brake and smoke the tires I here the lifters knock or a gas ping noise what could cause this. View more questions Search
|