Ask Experts Questions for FREE Help !
Ask
    sam 007's Avatar
    sam 007 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2012, 02:53 PM
    Instal a mixer
    I am installimg a shower to the end of the bath tup with a single mixer for both the shower head and the bath spout
    What is the correct height above the bath and dose it go to the centre or is it offset to the centre of bath
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jul 16, 2012, 05:49 PM
    Hi Sam

    No exact rules here. For tub/showers, I always install my mixer valves at about the belly button height of the tallest person in the house. You would then want to center the mixer and the shower head to the center of the drain.

    With that being said, however, the manufacturer of the mixer will have specific recommendations so read the instructions provided with the mixer and then decide how you want it set up, OK?

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to instal a photocell [ 3 Answers ]

I have an exxisting circuit with two exterir light. I want to add a third light but also put the lighting on a photocell. I ca not get access to the wire between the swith and the first light . How can i install the photocell?

Honeywell 230B Instal ? [ 3 Answers ]

I am attempting to install a new Honeywell RTH230B. It has a 5 wire hook up but the old unit I am replacing has a 6 wire hook up. On the old unit the wiring is Yellow-Y, Green-G, Red-R, Brown-O, White-W2, and Blue-C I understand I need to use the jumper, but where and where do I hook the...

Can't instal os [ 4 Answers ]

Hello, I have a HP Pavilion laptop that had a corrupt os and I formatted and tried to reinstall. I find I cannot instal as the os cannot find a hard disk on the system. Yet the hard drive can be assessed through a USB connection on another system I have. I tried various Hard Tishrinig.

Win instal [ 1 Answers ]

Hi all, Trying to install Windows has been a nightmare.. CD ROM not found or recognised (or not ready to read). Error reading floppy. Bios settings can't be changed because they are frozen. The latest has been this "The following file is missing or corrupted-- windows\command\com". Would...

View more questions Search