Ask Experts Questions for FREE Help !
Ask
    195460's Avatar
    195460 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2012, 09:13 AM
    Kenmore ultra wash dishwasher
    Control lock is on and will turn off after holding the no heat dry button for 4-10 or 20 seconds and even tried unpluging it .
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 14, 2012, 10:05 AM
    Check this out: https://dl.dropbox.com/u/8010163/Whi...ishwashers.zip
    Try this:
    Step one: Hold "Normal Wash" and "Start" together for 10 sec.
    Step two: Press "Air Dry" and "High Temp Scrub" back and forth until "Quick Rinse" button turns on solid.
    Step three: Press "Normal Wash" again followed by "Start."
    Step four: Let machine run until you see green "Clean" light come on.
    Step five: Press "Normal Wash" again and "Start" again.
    That's it. (From another post)
    Give this a try and see if it works.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you engage the lock on this dishwasher kenmore ultra wash smart wash dishwashe [ 1 Answers ]

How do you engage the lock on this dishwasher kenmore ultra wash smart wash dishwashe

My kenmore ultra wash dishwasher will not run the wash cycle, it fills then hums [ 0 Answers ]

My kenmore ultra wash dishwasher won't run the wash cycle, it fills with water then hums softly?

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? [ 1 Answers ]

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? Is there any easy fix to the flashing lights? I have the "normal wash" and "Cancel" lights flashing. The dishwasher does not work. Model: 665.1385

Kenmore ultra wash quiet guard deluxe dishwasher is stuck in wash cycle [ 2 Answers ]

I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?

View more questions Search