Ask Experts Questions for FREE Help !
Ask
    no1bigdog's Avatar
    no1bigdog Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 8, 2012, 04:09 PM
    How to replace an ignition switch on a 1992 chevrolet truck
    How to replace an ignition switch on a 1992 chevrolet truck
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 8, 2012, 04:39 PM
    It should be similar to this:

    . Disconnect negative battery cable.

    . Remove dashboard lower cover and knee bolster.

    . Disconnect connector from main wiring harness.

    . Remove steering column covers.

    . Insert key and turn it to "0".

    . Remove screws from switch and replace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to adjust headlights 2007 chevrolet silverado truck [ 1 Answers ]

Where are the adjusting screws on the headlights of 2007 Chevy Silverado new style truck?

Remove and replace ignition switch 92 chev van? [ 0 Answers ]

Sticking ignition in 1998 chevrolet cavalier [ 1 Answers ]

The ignition in my 1998 Chevy Cavalier keeps sticking. It seems like there is a locking system in the ignition. I have called around and it seems like I will have to fix the ignition and the parts to fix it can run $3-500.00. Is this accurate or are the dealers trying to take me for a ride?

How to replace an ignition switch on a 1992 chevy pickup truck [ 1 Answers ]

How to remove an ignition switch on a 1992 chevy pickup

1992 chevrolet blazer fuel pump electrical problems [ 2 Answers ]

When I turn key to start position, I have power on pump side of relay but when in run position pump side of relay is dead .if I hold key on and keep cranking engine power stays on pump side of relay ,as soon as you let go of key to run pump side dead . If I turn key to run without trying to start I...

View more questions Search