Ask Experts Questions for FREE Help !
Ask
    pourtoes's Avatar
    pourtoes Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2012, 06:48 PM
    Wiring diagram for ITT T99BV303J
    Wiring diagram for ITT T99BV303J
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 6, 2012, 06:59 PM
    Quote Originally Posted by pourtoes View Post
    Wiring diagram for ITT T99BV303J
    That is just an old 2 wire thermostat for heat only applications I believe. It is old and no diagram is available to the best of my knowledge.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need wiring schematic for an old itt general control gas valve [ 12 Answers ]

Help, I need wiring info for an old ITT general control gas valve on an outdoor swimming pool heater. The valve has 4 terminals, 2 labeled thermostat and 2 for the millivolt generator. I understand the safety devices get wired in series but I am not sure how the on/off switch and thermostat get...

Wiring diagram for ITT T99BV303J [ 0 Answers ]

I am trying to replace an old ITT thermostat model T99BV303J with a new programmable thermostat. The new Honeywell model RTH2300 says I need to identify the terminals (Y, W, R, G, etc) in the old thermostat as a first step. Nowhere on the old thermostat does it say what either of the two wires...

I need the wiring diagram for a 40" 12 horse, wiring for solonid&starter [ 3 Answers ]

I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter

Wiring for new Honeywell thermostat from ITT General Controls [ 10 Answers ]

I have an old ITT General Controls (mercury switch) thermostat for our electric furnace. I am trying to replace it with a Honeywell RTH230b thermostat. The old wiring has four wires (two white and two red) which are attached to screws labeled "F, H1, H2 and V". Looking at the wiring diagram on...

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

View more questions Search