Ask Experts Questions for FREE Help !
Ask
    Snk0303's Avatar
    Snk0303 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2012, 05:06 PM
    Electrical question
    Can I hook up a couple of my can lights in parallel with the light on the fan to the wireless switch?I can't find what the load requirements are to the receiver
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #2

    Jul 6, 2012, 04:17 AM
    Snk,
    No... first of all I doubt the relay that the remote triggers for the fan lights is rated for any additional load and then there is NEC 110.3(B) which tells us to install and operate equipment according to it's listing and labeling... does the fan and remote allow additional equipment to be connected to it? Probably not.
    If we want to as consumers and Saturday scientists we can make anything work... but someday if it blows up, the insurance won't cover it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical question [ 0 Answers ]

Trying to replace a ceiling fan/light but nothing is working. I didn't take note of how things were wired when I removed the old one. Coming out of the ceiling I have 1 black, 1 white, and 1 copper wire (ground). The fan/light has 1 white, 1 black, 1 blue, and one green wire. I attached the white...

Electrical question [ 1 Answers ]

Greetings. I have an outdoor hot tub. Like the water to be very very hot, most commercial models won't go above 104 degrees. The vendor I bought my tub from spliced a 300 ohm resistor into the thermostat heat sensor line which allows my tub to get up to 107-108. We just had to replace the...

Ask an electrical question? [ 1 Answers ]

I have just purchased a steam mop from the usa I live in the uk I also got a ac converter but the mop still dosen't work there is a green light on so there is power but it doesn't heat up. Can you tell me why this is

Electrical Question, obviously... [ 1 Answers ]

I am hoping that someone can help. I had the brilliant idea of changing all of my outlets and light switches in my living room and have somehow created a mess. First, I replaced all the outlets and everything worked fine, then I started on the light switches. At the hallway entering the living...

Electrical Question [ 3 Answers ]

I have a craftsman lt2000 riding lawn mower.Used the mower to cut grass and turned it off.Blew mower off with blower and now it won't start.Motor will not even turn over.Any suggestions?

View more questions Search