Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman Open Limit Switch
[ 10 Answers ]
I have a Goodman GDS80904BNA downflow furnace that does not work. It is 3 years old. I am getting the open limit switch error code on the circuit board when the T-stat call for heat. Only the circ. Blower turns on and rans continuously until I turn it off. Here is a little history on it. Once...
Goodman limit switch failure
[ 1 Answers ]
Hello, I have a goodman gm0150-5 furnace and above it is the ac coils I think. Yesterday I noticed that the inside furnace blower was not shutting off. I turned off the Thermostat completely, set the fan to auto and the thing is still running.. blowing air through my house... The outside...
Goodman limit switch diagram
[ 1 Answers ]
Goodman furnace flashing light code, flashes four times, I think it might have to do with a limit switch, not sure though, all diagrams and schematics unreadable.
Confirm need new limit switch? (goodman gmp075-3)
[ 11 Answers ]
Please help troubleshoot nat gas Goodman furnace. Power on. Fan/blower runs constantly, but no heat. No flame. 4 blinks. No manual, but I believe this to mean "open limit" by reading other posts for this model furnace. Furnace filter was very dirty and has been replaced. Traced wires back...
Goodman limit switch/pressure switch?
[ 2 Answers ]
Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the... View more questions Search
|